Write a Review

Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver

Campagnolo Upper Bolt and Springs

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)

- K-Force rotors feature a two piece design balancing weight and braking performance. Weight relieved alloy carrier for added rotor stiffness - Afterburner rotors have an increased surface area for better heat management - Rotors include: (1) 6-bolt/44mmBCD rotor with (6) T-25 rotor mounting bolts - 98g K-Force, 142g Afterburner

- AL7050 tubular alloy construction - 31.8mm clamp diameter - 800mm width - 7° back sweep - ISO-Mountain safety certified - 310-350g (Depending on rise dimension)

Origin-8's Pro Pulsion Bull Horn Handlebar is crafted from lightweight 6061-T6 aluminum. It features a great bullhorn shape that works great for fixed gear and city bikes. And, it comes in a bevy of colors to add pop to your ride.

The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures. The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts. - Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems. - Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Sold individually (single tire). Compatibility - Small: 1.9 – 2.25-inch wide tires - Medium: 2.25 – 2.5-inch wide tires - Large: 2.5 – 2.7-inch wide tires - X-Large: 2.7 – 4.0-inch wide tires

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chains - Material: Aluminum

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headsets are built with Enduro black oxide bearings and have a one-year warranty. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Upper assembly features: - Ultralight Stem Cap With Integrated Spacer plus an aluminum bolt and a star nut. - 7mm top cover = 8mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing. - Bearing top cap outer diameter 45.8 mm

Rack 'em! Designed to complement the clean lines of the Townie collection, the Townie rear rack adds utility while still looking great. - Original equipment replacement rear racks for Electra Townie Commute bikes - Color-matched for direct compatibility - Compatible with the Bontrager Interchange system - Max load rating is 55lbs (25kg) - Size: 700c - Material: Aluminum

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 26-inch

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Front - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products. BENEFITS: ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade! - Easy to Install - Hassle Free - Self-Bonding - No Residue - No Adhesives - UV Resistant NO CLEAN UP: The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed! USES: There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs. Some other great uses include: - Tool Handles - Finishing Tape - Protecting Wear Points - And Much More The possibilities are endless!

ABUS' Pro Tectic 4960 Chain provides an additional layer of security when using the Pro Tectic 4960 Frame Lock (sold separately). Patented "push n' lock" technology makes using this accessory chain a snap, no separate closing of the shackle is necessary, and your bike can be easily secured to a fixed object. The 6mm chain is made of special hardened steel. This chain cannot lock to itself, only to the Pro Tectic 4960 Frame Lock. - Mechanism Type: Key - Diameter: 6 mm - Shackle Shape: None - Length: 85 cm/100 cm - For use with the ABUS Pro Tectic 4960 Frame Lock

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics

X-Superlight series chains are high-quality, high performing chains offering amazing shifting performance on any drivetrain you choose. For athletes looking for the lightest, strongest, smoothest shifting chain look no further. The main characteristic of the black Diamond Like Coating (DLC) is reduction of abrasive wear. Besides this, it’s surface hardness is higher than most coatings, this ensures a long-term function, optimal stability and higher durability. - Includes KMC Missing Link 11 - Compatible with all 11 speed systems (including Campagnolo/Shimano/SRAM) - Weight: 243g

The Bunny Hop is a solid BMX contender with a uniform configuration of sipes and treads engineered for consistent traction when maneuvering between asphalt and pavement. Go ahead, shake that tail! - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

SockGuy's most popular Classic socks feature offbeat, original designs that appeal to a broad range of athletes — from professionals to weekend warriors to multi-sport enthusiasts — who like to have unique socks to match their personality and attitude. Classic socks feature: - Superior softness and comfort that helps eliminate blisters and hot spots - Mesh upper for supreme air flow - Double-stitched heel and toe for strength and durability

This graphic tee celebrates Q's heritage and progress with a nod to the year the company was founded and our B Corp status. - Material: Cotton

The Aireator 6" in black with hops and barley graphics on cuff in lime and khaki. The thin profile Aireator features an open mesh weave over the foot top, making these lightweight socks ideal for all forms of cycling and everyday adventure. Breathable, moisture wicking, and durable. - No padding / 4-season / synthetic - Content: 60% Nylon, 39% Recycled Polyester, 1% Lycra - Weight: 1.6 oz/.10 lb - Care: Machine wash cool. Tumble dry low. No bleach, softeners, or harsh detergents. Engineered to be long-lasting, DeFeet products are sustainably manufactured within a local supply chain. Our wool goods are made from USA-grown Merino, traveling from Oregon to the Carolinas for processing and knitting. Our recycled poly is manufactured right here in North Carolina at Repreve from locally collected post-consumer water bottles.

- Replacement cable anchor bolt for brakes - Includes nut and washer

The W's Neo Power Art Motion Shorts are perfect for any rider who prefers shorts over bib shorts, but also appreciates the benefits of premium fabrics, a comfortable fit and high-performing apparel. The Neo Power Art Motion Shorts are a great choice for any rider who prefers shorts over bib shorts, but also appreciates the benefits of premium fabrics, a comfortable fit and high-performing apparel. The biggest feature is our completely redesigned women's specific Hitop waistband. The Hitop waistband provides a taller height than traditional women's waistbands, which provides more contact area for the waistband to connect to the rider's waist. This enables the shorts to come up a bit higher than in the past, while still providing the support that you'll find in this area when wearing bib shorts. The band offers the perfect blend of comfort and support and is extremely breathable with the addition of laser-cut, perforated vents on the sides of the waistband. In addition to the updated waistband, we used premium materials such as the Power + LYCRA® fiber and Pro + LYCRA® fiber to offer a compressive fit with fabrics that are quick-drying. Anti-chafing seams and laser-finished leg bands round it out to offer modern features for every shorts-lover out there. Technical Details: - Fit Tech: Compressive - Fabric: Power + LYCRA® fiber: Our most popular compressive fabric is designed to fit muscle shape and provide maximum support for muscular fibers - Pro + LYCRA® fiber: Support and shape recovery - Endurexx: Chlorine-resistant and soft to the touch for more comfort. Great stretchability that adapts to all shapes - Fabric Technology: Compressive and quick-drying - Chamois: Motion airgel - Inseam: 9.5" / 24 cm - Leg Finish: Lazer-finished at thighs - Sun Protection: UPF/SPF 50 - Visibility Features: Reflective logo - Waist: Flattering HugFit waist

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims

The MET Trenta MIPS a performance road helmet engineered to maximize ventilation and save you energy with every pedal stroke. Featuring the MIPS-C2 rotational management system, the MET Trenta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. Scientifically designed air vents harness the power of the Venturi effect, pushing out warm air within the helmet through specially positioned exhausts to ensure constant airflow. The tail of the helmet also features an aerodynamic design to effectively drive airflow. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - 19 vents and an internal air channeling system are engineered to improve ventilation and comfort - Sunglass ports securely dock sunglasses when climbing or resting - Tube-shaped tail improves aerodynamics - Limited contact with the surface of the head helps to maximize the ventilation - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm