Skip to main content
Free shipping on orders over $150!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$280.00
Next-level performance protector daypack focused on carrying comfort, weight reduction, and flexibility. - Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next-level carrying comfort, back fit and load distribution - Wide hip wings and Airoflex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof raincover - Compatible with hydration bladders up to 3L - Volume: 26L
$280.00
- Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next level carrying comfort, back fit and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Material: KODRA, P200D, Airo Flex - Volume: 26L - Size: 26 x 50 x 16cm (10.2 x 19.7 x 6.3") - Weight: 1.07kg (2.4lbs)
$279.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
$272.99
A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 31.6L / 1928 cu/in (pair) (15.8L / 964 cu/in each bag) - Weight 1320g / 2.91 lbs (pair) - (660g / 1.46 lbs each bag) - Dimensions 39x27x15cm / 15.4-inches x10.6-inches x5.9-inches (each bag)
$272.99
Hook your bike up to Sunlite's F1 Trainer w/Remote and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel. The remote lever attaches to your handlebar for easy resistance adjustment. Plus, this trainer includes an easy-to-use steel quick-release lever.
$272.00
- 11 speed compatible - Allows removal, installation and peening of rivets
$145.02 - $271.32
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
$270.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED
$270.00
Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.
$270.00
You love traveling with lots of luggage? Then you should avoid extra weight whenever you can, it’s only logical. LOGO CLASSIC EDELSTAHL will help you: Its design is particularly narrow, lightweight, and extremely durable. Offering lots of room for a sleeping bag & Co on top, plus space for side panniers, safe and stable. The LOGO CLASSIC EDELSTAHL also fits on particularly short frames. - Material: Stainless steel - Inches: 26'' | 28'' - Weight: 828g - Loading capacity: 26kg | 57.3lbs - Diameter: 10mm | 0.4in
$269.99
Enjoy the advantages of the innovative, hands-free SmartX cylinder and turn your iOS or Android smartphone into your individual key. Combined with the 100 dB alarm, this lock offers the highest level of security for high-quality e-bikes and cargo bikes. - 5.5mm bars with extra-soft, two-component casing to prevent damage to the bike's paint - SmartX locking system with Bluetooth—high-quality, keyless locking offers user-friendly operation - Alarm function blasts at 100dB for 15 seconds followed by automatic reactivation - 3D Position Detection—detects vibrations and the smallest movement in all three dimensions and triggers the alarm - Smart alarm—the lock only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces against the bike - USB-C port - App connection - Location storage of the bike's last parking location - LED light shows battery and charging status - Includes bracket (SH)
$269.95
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life
$269.95
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.
$269.95
Topeak's TwoUp TuneUp Bike Stand easily holds 2 bikes up and out of the way. But, the best part is that it's solid enough to serve as a light-duty work stand as well! Made with tough aluminum tubing, the center pillar extends to almost 7 feet while the tripod base acts as a super-stable platform. The 2 included bike mounts swivel up to 30 degrees to accommodate sloping tubes and the lower mount includes a handlebar stabilizer to hold your bike while you're wrenching. Plus, this awesome stand has the capacity to carry up to 4 bikes and 158.7 pounds.
$269.00
The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. - Every detail machined and optimized to save on weight and maximize your performance - Factory tuned compression (in open position) provides the highest level of XC performance, precision and control - Maximum efficiency with a rock-solid lockout
$268.95
Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.
$267.95
Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted
$263.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED
$262.95
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.
$260.00
At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.
$260.00
- Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next level carrying comfort, back fit, and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Material: KODRA, P200D, Airo Flex - Volume: 16L - Size: 50 x 26 x 12cm (19.6 x 10.2 x 3.5") - Weight: 1kg (2.2lbs)
$260.00
Next-level performance protector daypack focused on carrying comfort, weight reduction, and flexibility. - Next-generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next-level carrying comfort, back fit and load distribution - Wide hip wings and Airoflex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof raincover - Compatible with hydration bladders up to 3L - Volume: 16L
$259.99
A set of no-nonsense panniers for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 55.3 L / 3372 cu in (pair) - Weight 1520g / 3.35 lbs (pair) - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner on back-plate protects contents from scratches and improves internal visibility - Daisy-chain webbing for additional tie-down options. - Rixen & Kaul VARIO 1 hooks are adjustable from 6mm-16mm. - The Rixen and Kaul lower SLIDE-LOCK rail and FLIP-LOCK hold panniers firmly in place
$259.99
- Professional quality folding repair stand - Telescoping center pole and folding base make it easy to transport and store - 360-degree clamp rotation with quick release lever - Includes: Work Tray
$255.00
The GRAND TOUR has what it takes to become a new tubus classic! With its narrow but functional loading area, it combines stability and extreme rigidity with a discreet appearance. The luggage carrier feet are reduced and designed as a minimalist tube construction. The GRAND TOUR packs the 26 kg payload with ease, making it almost indispensable on modern touring bikes. It provides faithful service thanks to its second loading level and the option of using a tensioning strap both lengthwise and crosswise.
$254.95
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"
$250.00
- The Pro Seat is the ultimate child seat for MTB families. It's lightning fast to attach and remove, is fully adjustable, and has zero frame contact. - Designed for children 2 – 5 years (up to 60lb / 27kg) - Super fast to fit, remove and swap between bikes - Fully adjustable with zero frame contact - Adjustable to fit electric and regular mountain bikes - Fits all bikes with standard 1-1/8 steerers (10mm clearance required)
$250.00
High visibility is so important to us at Ortlieb because it is a matter of safety. Both the waterproof, polyurethane-coated Cordura fabric in neon yellow and the black fabric parts of this bag are densely interwoven with high-luminosity reflective yarn. This composition turns the entire bag into an eminently visible reflector when it is picked up in the headlights of passing cars. The waterproof Sport-Packer is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Classical pannier (pair) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Can be used individually or as pairs for the rear or front rack (low-rider) - Including integrated inner pocket and shoulder strap - Ideal for use on children's/youth bicycles - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside
$250.00
You're lookin' at the Surly Big Dummy Bag Version 2.0. Just like the original, it's designed to work with Dummy-style rail systems found on cargo bikes like our Big Easy, Big Dummy, and Big Fat Dummy. We've made it easier to install, simpler to use, and refined its size and shape to better suit the stuff we haul most often. The sequel is slightly smaller, but you can still cram two full grocery bags in there on shopping day. Three if you like your potato chips pulverized. The Big Dummy Bag features an expandable cargo flap and side panels that can lie flat or cinch up to accommodate loads of varying dimensions. It also has two sizeable inner pockets with a dedicated divider so you can keep your legal documents tidy. It's furnished with adjustable daisy chains, straps, and buckles to help you secure bulky shit that may not fit otherwise, as well as three stainless steel drainage ports so you can hose it out after hauling your compost to the dump. Lastly, the bag's main body is tough 1680D nylon and its liner is 400D nylon. The material is also bluesign® Approved. So are the buckles and other hardware. This means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. - 22.5L capacity per bag
$250.00
- LITESHIELD BACK PROTECTOR offers 95% shock absorption - Separate, centred, well PADDED BATTERY COMPARTMENT - with ultra-safe fixation system - CHARGER STRAP fixation system - CONTROL DISPLAY COMPARTMENT (fleece-lined) - FREE PROTECTOR CRASH REPLACEMENT - Material: N210 D Ripstop, Airo Flex - Volume: 16L - Size: 27 x 56 x 11cm (10.6 x 22 x 4.3") - Weight: 1.32kg (2.9lbs)
$250.00
EVOC BLACKLINE backpacks represent the perfect blend of innovative ventilation and the successful technology standard of their PROTECTOR BACKPACKS. The EVOC FR TRAIL BLACKLINE is a high-end day pack with a back protector that offers optimal support during longer bike tours and trail rides. - Integrated back protector: backpack also serves as personal safety equipment (PSE) - Body-hugging fit - Completely ventilated carrying system with breathable hip belt - Back protector is removable and replaceable - 2-Step-Zip System - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, wide swing-open) - Rain cover (integrated) - Accommodates hydration systems up to 3L (not included)
$250.00
- Next-generation protector backpack in XS sizing for torso lengths of 33-37cm - Liteshield PLUS back protector in size XS - Extremely lightweight - Next-level carrying comfort, back fit, and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Compatible with hydration bladders up to 2L - Volume: 12L - Weight: 990g (2.0lbs)
$229.99 - $249.99
Bike security gets smart. The use of innovative technology, combined with maximum mechanical security, makes the 770A SmartX the most secure bike lock in its class. Enjoy the benefits of the innovative SmartX cylinder and make your iOS or Android smartphone your individualized key. Combined with the proven 100dB alarm, this lock offers maximum security for high-quality E-bikes and load-carrying bicycles. - 13mm hardened square shaft parabolic shackle - SmartX locking system with Bluetooth—high-quality, keyless locking offers user-friendly operation - Alarm function with at least 100 dB for 15 seconds followed by automatic reactivation - 3D Position Detection—detects vibrations and the smallest movement in all three dimensions and triggers the alarm - Smart alarm—the lock only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces nearby - USB-C port - App connection - Location storage of the bike's last parking location - ABUS power cell technology offers the highest level of protection against impacts and attempts to break open the lock - The shackle, the housing and the locking mechanism's load-bearing parts are manufactured from specially hardened steel
$249.99
Bike security gets smart. The use of innovative technology, combined with maximum mechanical security, makes the 770A SmartX the most secure bike lock in its class. Enjoy the benefits of the innovative SmartX cylinder and make your iOS or Android smartphone your individualized key. Combined with the proven 100dB alarm, this lock offers maximum security for high-quality E-bikes and load-carrying bicycles. - 13mm hardened square shaft parabolic shackle - SmartX locking system with Bluetooth – high-quality, keyless locking offers user-friendly operation - Alarm function with at least 100 dB for 15 seconds followed by automatic reactivation - 3D Position Detection – detects vibrations and the smallest movement in all three dimensions and triggers the alarm - Smart alarm – the lock only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces nearby - USB-C port - App connection - Location storage of the bike's last parking location - ABUS power cell technology offers the highest level of protection against impacts and attempts to break open the lock - The shackle, the housing and the locking mechanism's load-bearing parts are manufactured from specially hardened steel - Security Level: 15 - Locking type: key - Carrier: USH with bracket - Length: 9-inch
$249.99
The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch
$249.99
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
$249.95
Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.
$249.95
HAJKER is a great waterproof adventure daypack, with a roll top opening and plenty of smart storage solutions. The pack is made for highspeed activities and is equipped with our bounce free No Dancing Monkey 2.1 harness system and waist support belt that makes the pack stay put on your back without cramping your style. - Zero bounce with No Dancing Monkey 2.0 + Snug Me – Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit. - 2-in-1-The waist belt can be used on its own, perfect as a lightweight hip-pack for short rides - Waterproof – Roll top opening to keep your gear safe from all kinds of weather. - 30L of total storage – fit everything you need for a full day of adventure WATERPROOF HIKING DAYPACK FOR THE BIG ADVENTURES The Hajker is the optimal hiking day pack with a big 30L main compartment with a roll top and an inner dry sack, waterproofing your gear for all kinds of weather. Store the stuff you need quick access to in the two zippered side pockets and compress it all together from the outside to get slimmer profile and a stable backpack that doesn’t bounce when you are out exploring, climbing, or running in the roughest terrain. The waist belt secures the lower part of the backpack and can also be detached and used on its own, like a hip-pack. You also got a helmet carry system that detachable and stored in a pocket when not in use. The pack also comes with an insulated water bladder pouch if you ever want to add a hydration bladder with the pack (bladder not included).
$240.50
Bosch Aftermarket Kit Smartphone Hub, with 1500mm DU-cable, Universal Mount and Compact Remote and Mounting Parts. The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph
$240.00
The waterproof Sport-Packer Plus made of tough Cordura fabric is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Universal panniers for low-rider racks in the front or rear racks - Abrasion resistant Cordura fabric - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Ideal alternative to Sport-Rollers (can be loaded higher due to its lids) - Symmetrical shape allows use on right or left side - Ideal as "small" rear panniers for children's or youth bikes - Simultaneous use of Ortlieb Travel-Biker possible - Possibility to attach the Ortlieb carrying system - Highly reflective Scotchlite reflector - Easy to clean inside
$240.00
The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)
$240.00
The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)
$240.00
- Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next level carrying comfort, back fit, and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Material: KODRA, P200D, Airo Flex - Volume: 26L - Size: 26 x 50 x 16cm (10.2 x 19.7 x 6.3") - Weight: 1.07kg (2.4lbs)
$240.00
Next-level performance protector daypack focused on carrying comfort, weight reduction, and flexibility - Next-generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next-level carrying comfort, back fit and load distribution - Wide hip wings and Airoflex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Volume: 10L
$188.21 - $239.25
Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size
$235.95
Big cities call for big protection, and Kryptonite's New York Fahgettaboudit delivers with 14mm six-sided chain links made from hardened manganese steel. Wrap this burly lock around your frame worry-free thanks to the durable nylon cover that protects your bike's paint from scratches, and leave with peace of mind knowing the 15mm hardened Max-Performance steel shackle is on duty. With a double deadbolt design to protect against twist attacks, would-be thieves with an eye on your bike can fahgettaboudit because you're the only one with access to your bike with three stainless steel keys--one of which is lighted for night access!
$235.60
This single e-bike light is an extremely light and compact unit, making it perfect for both fast road cycling and commuting. It automatically adapts to 6V or 12V voltage so it is compatible with most motors including Bosch, Brose, Shimano, and Yamaha systems. - Up to 1400 lumens depending on battery and motor combination
$233.12
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers. - Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96 - Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers
$232.14
The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.
$230.99
Hook your bike up to Sunlite's F2 Trainer and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel.
$230.00
Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside
$230.00
Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps
$229.99
- Physical security of the Bordo GRANIT XPlus 6500 now with an alarm. - 90cm length - Sensitive vibration alarm thanks to 3D Position Detection - Short warning tone in case of small or short movement - Alarm of at least 100 dB for 15 seconds - Automatic activation - Acoustic signals inform about battery and activity status - Inactive transport position - Easy battery replacement without tools (type CR2) - Good protection with high security
$229.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
$229.95
FLOW is our high-end Performance mountain bike protector backpack with an integrated and removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. The daypack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me waist support belt that makes the pack totally bounce free on your back without cramping your style. - Zero bounce with NDM2.0 + Snug Me – The No Dancing Monkey 2.0 harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit . - Stay protected – Worry less about falling over and more about how to gain speed with the removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. ZERO BOUNCE ON THE TRAIL MOUNTAINBIKE CRUSADES With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the NDM 2.0 + Snug Me harness you’re going to get the best fitting sports backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system, armor attachment points, and a removable Lev.1CE-Certified by SAS-TEC full back protector that makes this pack perfect for your freeride or enduro bike adventure. CARRY YOUR GEAR The FLOW 25 MTB backpack has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles or personal gadgets. We even threw in a microfiber cleaner tissue, we thought of everything! You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style. STAY HYDRATED Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps.
$229.95
The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31". The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Thermal Overload Protector – Shop-Style Inflator with 120 PSI Gauge – 120 PSI Pressure Gauge with Rubber Boot – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – 2-Pin SAE Connection with Battery Terminal and Clamp Options – Deluxe Carry Bag SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 30 min. @ 30 PSI – Max. Working Pressure: 120 PSI – Max. Amp Draw: 23-Amps – Ingress Protection Rating: IP54 – Dimensions: 6.8?L x 3.7?W x 6.5?H – Net Weight: 5.75 lbs. – Power Cord Length: 6ft.
$229.00
Precision-machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm For use with: - Suspension damper shafts - Suspension damper cylinders - Suspension air-spring cylinders - Suspension piston shafts - Thru-axles Clamp 10-006 fits - 8mm - 9mm - 10mm - 12.7 - 15mm - 15.9mm - 16.7mm Clamp 10-007 fits - 17.5mm - 18.7mm - 19.5mm - 21mm - 22.2mm Clamp 10-008 fits - 23.8mm - 25.4mm - 28.6mm
$225.00
The Klic Floor Pump effortlessly adapts to your needs with a magnetic quick-connect interface. The hidden hose with integrated gauge stores neatly away in the pump body when not in use, and can be used separately as a standalone tire pressure gauge. The optional burst tank installs or removes in seconds, and can be used either separately or integrated for installing and inflating tubeless tires with ease. - Burst tank can be pressurized to install and inflate tubeless tires - Tank is removable for easy transport - Hidden hose stores neatly in the body of the pump
$225.00
"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"
$9.99 - $224.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.