Accessories

Blaze MK3 With ReAKT And Peloton is a premium rear light that has all the versatility of various rear light technologies merged with a hefty run time. - Ambient Kinetic Technology (ReAKT) enables the light to automatically flare under braking and when entering areas of higher ambient light to create a contrast in brightness. Peloton mode dims rear light when a following rider's front light is detected - Optimized Mode Selector provides multiple programs for a choice of run times and modes so you can find the right one for your ride - DayBright flash pattern and side illumination for 360° visibility makes this an attractive package

The Monogram BMX Bike Bag isn’t skimpy, but it also isn’t overbuilt to keep the weight down. If you’ll be traveling with your bike, this bag will make things a whole lot easier. Features: - Easy load opening - Interior tool pouch - Bike specific handle locations and lengths - Reinforced and riveted handles - Heavy duty and grippy wheels - Multiple tie downs and straps - Minimal details for lightweight and stealth looks - Interior divider for clean/dirty sections as well as for hiding the bike

Designed and built specifically for a wide variety of bicycle Torx compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite Torx compatible set, the THT-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). - Carefully selected combination of Chrome Vanadium and S-2 tool steels - T6, T8, T10, T15, T20, T25, T30 and T40 Torx compatible wrenches included - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions - Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful! - Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches

BORDO™ 6000K FOCUS ON SECURITY, HANDLING AND FLEXIBILITY Place your trust in the quality of a classic model: The BORDO™ 6000K folding lock offers good theft protection in an easy to use package. The BORDO 6000K Folding Lock features six 5 mm steel bars connected with special drill resistant rivets, which fold together into an easy to transport package. This is familiar territory for ABUS – the locks in the ABUS Bordo family have gained a reputation as true classics whose functionality has nevertheless yet to be surpassed. This is a variant that can be opened by one key. Made of specially hardened steel, the bars and housing offer high resistance. At the same time, the high-quality ABUS XPlus cylinder provides particularly high protection, e.g. against picking. The soft coating provides protection against paint scratches. It also makes the lock easy to grip. The "Made in Germany" quality has garnered international awards. - 5 mm bars with extra-soft yet resistant coating to prevent damage to paintwork - The bars and lock body are made of specially hardened steel - Bars are connected by special drill resistant rivets - ABUS XPlus cylinder for extremely high protection against manipulation, e.g. picking - SH holder incl.

Backpack or pannier? With the versatile and innovative Vario PS, you no longer have to ask yourself this question. Featuring our Quick-Lock attachment systems on one side and a padded carrying system with chest strap and ergonomic shoulder straps on the other, The Vario PS transforms from backpack to pannier faster than ever before. A so-called Flap with an integrated pocket covers the side that is not in use. And for any items that you need quick access to, there is a zippered outer pocket. Everything else can be accessed via the practical and proven roll closure, including your laptop for which a padded compartment is provided. This waterproof hybrid bag is PVC-free and sustainably manufactured in Germany. Further features: - Reflectors - Reflective yarn in the shoulder straps - Mesh outer pocket on the side

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

Plenty of space for your day at the office—no matter whether your office is in a meadow, a cafe or an old factory building on the other side of town. The Ortlieb Commuter Daypack City is a waterproof city backpack made of lightweight, durable nylon fabric. With its roll closure, its large main compartment, and its padded notebook compartment, it provides a secure place for your documents and other gear no matter what the weather. And thanks to its outstanding carrying comfort, it's always a pleasant companion to take along. Further features: - Reinforced underside - Air-permeable shoulder straps - Back padding with ventilation channels - Removable breast and waist straps - Zippered front pocket (not waterproof) - Loops for rear light and U-lock - Reflective yarn and reflective logo for more protection at night - Dimension notebook compartment: 39cm x 27cm x 2.5cm / 15.4" x 10.6" x 1"

Ortlieb's far traveled classic model made of robust polyester fabric is designed for lowriders in the front or for the rear rack and is also suitable for children's bikes. With its QL2.1 system, it is quickly mounted and taken off the bike rack. - Classical pannier (pair) with roll closure - Can be used individually or as pairs for the rear or lowrider - Sides of PS490 nylon material, front and back of PD620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10, and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Ideal for use on children's/youth bicycles - Easy to clean inside

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

- Square 3/8-inch reversible ratchet drive features unique push-through design for superior durability and reliability. - Designed for left-hand or right-hand thread 10-80Nm torque settings required for bottom brackets, cassette lockrings, and other high torque components. - Quickly set torque using a micrometer-style dial and simple locking mechanism. - Includes 3/8-inch square to 1/2-inch square adapter and 3/8-inch square to 1/4-inch hex adapter. Torque wrenches have become an essential bicycle tool. The increase in carbon fiber bikes and components have driven the need. While carbon fiber allows for more optimal design and provides a far higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Grande Torque Wrench features a 350mm length designed for left-hand or right-hand thread 10-80Nm torque settings required for bottom brackets, cassette lockrings, and other high torque components. A unique push-through, reversible, 3/8-inch ratchet drive delivers superior durability and reliability. This click-type torque wrench makes an audible click when desired torque is reached and is quickly set in 0.5Nm increments using a micrometer-style dial and simple locking mechanism. The Grande Torque Wrench also features heat-treated steel construction for accuracy, strength, and reliability, and includes a 3/8-inch square to 1/2-inch square adapter and a 3/8-inch square to 1/4-inch hex adapter. Accurate to within +/- 4 percent. Backed by a Pedro's two year warranty.

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

- Waterproof (IPX3) - Elastic cord on top and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible: MIK system - Volume: 7L - Bag Dimensions in cm: 32 x 20 x 20

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

- Clamp height adjusts from 41.75"- 56.75" (106 to 144 cm) to allow you to work at a comfortable level - Clamp head rotates 360° - The articulating jaw on the clamp provides a large clamp opening, allowing the bike to be easily inserted and removed by flipping the cam lever. - Clamp head is micro-adjustable to accommodate various tube sizes. - No tools required for quick setup and storage - Lightweight aluminum construction - Product Weight: 13.6 lbs (6.18 kg) - Max load capacity: 77 lbs (35 kg)

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

- Ratchet operates in clockwise and anti-clockwise directions - For tightening on right hand threaded bolts and nuts - Signal when set torque is reached - Default value for the recalibration interval is 12 months of use, or approximately 5000 cycles - Dual scaled, Nm and Kgm

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Learning to ride safely is easy with Sunlite's Training Wheels. These wheels roll smoothly thanks to their heavy-duty steel construction with hard rubber tires. They fit bicycles with wheel sizes of 20 to 26 inches, and the height adjusts as the rider learns balance.

- Durable alloy and wood construction - Rubber carrying handle - Mounts to rear rack with two quick release spring-loaded clamps - Dimensions (W x L x D): 11.8 x 15.7 x 7"

This tubular alloy front rack with espresso stained wood plank cargo deck is perfect for getting take-out or a 6-pack. Adjustable struts for use with 26-inch through 29-inch wheel sizes. The 15 x 13.25-inch deck supports cargo up to 11 lbs.

- Your favorite Shotgun products, now in one combo package! - Includes the seat, the handlebar, and 2 exclusive items: One mudguard and one stem cap. ABOUT THE SHOTGUN KIDS MOUNTAIN BIKE SEAT: - Front mounted child seat for kids 2 – 5 years - Full rubber protection (for alloy or carbon frames) - Adjustable width and angle to fit all mountain bikes - Quick release fitting for easy installation and removal ABOUT THE SHOTGUN HANDLEBARS: - Accessory for the Shotgun Kids MTB seat - Allen key fixing for easy fitting, removal and adjustment - 250mm in length, with rubber grips designed for little hands - Comes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Suitable for flat or riser style handlebars

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

Kryptonite's New York Cinch Ring Chain is a 12mm, six-sided link chain made of triple heat-treated, manganese steel giving it maximum strength. The chain includes a special larger cinch ring design for maximum usable length, lighter weight and less bulk than full length chains. It secures with Kryptonite's Evolution Series 4 Disc Lock that boasts a 14mm hardened steel shackle for top-notch security. Three keys are also included, with one featuring a high-intensity LED bulb for convenient, easy unlocking in the dark. This New York Cinch Ring Chain has an anti-theft protection offer.

The EVOC FR Lite Race protector backpack has been specially designed for enduro bike races. Low weight and a completely ventilated carrying system are the highlights of this race backpack. (With an optional bladder, you also have the perfect hydration pack.) - Back protector is removable and replaceable - Attachment system for: helmet (XC, full face) - Quick-access tool compartment - Hip belt pockets - Nutrition pocket on the right shoulder strap - Accommodates hydration systems up to 3L (not included)

- The 2.0 Seat improves on the original Shotgun Seat with the addition of a quick release mount, 2 adjustable leg lengths, and more rubber protection. - With your child riding shotgun, you’ll help foster a love of the outdoors and a passion for riding. The only problem you’ll have is getting them off it. - Designed for children 2 – 5 years (up to 22kg or 48lb) - Quick release for super fast install, removal and swap between bikes - Adjustable width and angle to fit all mountain bikes (not including e-bikes)

GRANIT™ XPLUS™ 540 PLAY IT SAFE! The highest level of security from the ABUS range: The GRANIT XPlus™ 540 U-Lock offers the best protection against theft for your bicycle Specially hardened steel, power cell technology for protection against impact and attempts to force open the lock, XPlus cylinder for the greatest protection against tampering: The GRANIT XPlus™ 540 U-Lock combines the highest-quality materials with the latest technology for protection against theft! It is a first-class lock which protects your bicycle when the risk of theft is high. Various quality seals demonstrate the value of the GRANIT XPlus™ 540 U-Lock: It is VdS approved and has received seals of approval from institutes in Russia, the Netherlands, Finland, Sweden, Denmark, Norway and the United Kingdom. - 33/64" hardened square shaft parabolic shackle - ABUS power cell technology offers the highest level of protection against impacts and attempts to break open the lock - The shackle, housing and the structural parts of the locking mechanism are made of specially hardened steel - ABUS XPlus cylinder for the highest level of protection against tampering, e.g. picking - Automatic keyhole cover to protect against dirt and corrosion