Accessories

With a 2200 lumen output, you'll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon. FEATURES - Lumen Output: 2200 - 7 Modes with Run Times: 3:00 – 50:00hrs - Charge Time: 5:00hrs - Weight: 702g - Battery: Li-Ion - 8 Step Fuel Gauge - Handlebar and Helmet Mountable - Water / Dust Resistant IP64 Rated RUN TIMES Low—12:00h at 500 Lumens Medium—6:00h at 800 Lumens High—3:00h at 2200 Lumens Flash—50:00h at 730 Lumens Beacon—50:00h at 730 Lumens S.O.S.—50:00h at 730 Lumens Race—50:00h at 250 Lumens

Boasting 4200 lumens and 6 CREE LEDs at 6000k; the Pro 4200 Enduro offers 4 brightness settings and a daylight flash mode that are factory-tuned to optimize riding in any condition. And, a long-lasting 8-cell battery that doubles as a USB portable charger makes this lighting system perfect for long night rides, high speed MTB descents, or backcountry touring. - Ultra bright 4200 lumen output - 8 Cell Li-Ion battery, doubles as a USB portable charger - Remote switch for ease of operation - The preferred light for serious MTB riders - Highly durable light housing with Dupont Fiberglass reinforced nylon - Perfect for handlebar mounting - FL 1 Standard IP64, dust and water-resistant - 4 steady light modes and 1 daylight flash - Custom 3 cone dual-beam reflectors utilizing 6 CREE LEDs at 6000k - Convenient nylon storage pouch Warranty: - The Pro 4200 Enduro Remote is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. System Includes: - LED Headlamp with Remote Switch - Li-Ion Battery/USB Portable Charger - Handlebar Mount - Fits up to 35mm - AC Adapter - Nylon Storage Pouch

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Divide Fat fits up to 26×5" or 27.5×4.6" tires. - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 5.1" x 12" (130 mm x 306 mm) - The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide Fat come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55 lbs when eyelet is mounted. For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black - Made in Taiwan - Stainless Steel mounting hardware - Lifetime warranty!

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

The waterproof Sport-Packer Plus made of tough Cordura fabric is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Universal panniers for low-rider racks in the front or rear racks - Abrasion resistant Cordura fabric - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Ideal alternative to Sport-Rollers (can be loaded higher due to its lids) - Symmetrical shape allows use on right or left side - Ideal as "small" rear panniers for children's or youth bikes - Simultaneous use of Ortlieb Travel-Biker possible - Possibility to attach the Ortlieb carrying system - Highly reflective Scotchlite reflector - Easy to clean inside

High visibility is so important to us at Ortlieb because it is a matter of safety. Both the waterproof, polyurethane-coated Cordura fabric in neon yellow and the black fabric parts of this bag are densely interwoven with high-luminosity reflective yarn. This composition turns the entire bag into an eminently visible reflector when it is picked up in the headlights of passing cars. The waterproof Sport-Packer is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Classical pannier (pair) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Can be used individually or as pairs for the rear or front rack (low-rider) - Including integrated inner pocket and shoulder strap - Ideal for use on children's/youth bicycles - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-3C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits all generations of PRS-2, PRS-3, and PRS-4 stands, and PRS-5 stands manufactured before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers. - Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96 - Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.